Instant Reverse Limited Duty 1/2 HP Motor

• 5L V-Belt, Chain and Sprocket Reduction
• #41 Chain on Final Drive
• Output Shaft Speed: 39 rpm
• Adjustable Friction Clutch
• Mechanical Brake
• Thermal Protection
• C2 Wiring, B2 or D1 can be very easily set
• Pre-wired for Open Override, Safety Reverse, Radio Control
• Wall, Hood or Shelf Mounted on either side of the door
• Clearance: side room required is 15″
• Maximum Recommended Door Height: 14″

Options: Spreader, Hoist on Left, Delay on Reverse

• Floor level disconnect for Manual push up Operation
• Continuous Duty Motors up to 1 HP
• 5L V-Belt, Chain and Sprocket Reduction
• #50 Chain on Final Drive
• Output Shaft Speed: 41 rpm
• Adjustable Friction Clutch
• Mechanical Brake
• Heavy Duty Reversing Contactor
• Full Overload Protection
• C2 Wiring, B2 or D1 can be very easily set
• Pre-wired for Open Override, Safety Reverse, Radio Control
• Wall, Hood or Shelf Mounted on either side of the door
• Clearance: side room required is 15″

Main Options: Spreader, Delay on reverse, Timer to close, Double limit, Electronic Control Board

Model HJ: model with automatic chain hoist as well as floor level disconnect for emergency egress.

• Chain hoist with electrical cut out
• Continuous duty TEFC motors up to 2 HP
• Worm gear in oil bath
• Solenoid Brake
• Heavy Duty Reversing Contactor
• Full Overload Protection
• C2 Wiring, B2 or D1 can be very easily set
• Pre-wired for Open Override, Safety Reverse, Radio Control
• Output shaft speed: 38 rpm
• Wall, hood or shelf mounted on either side of the door
• Clearance: side room required is 15″

Main Options: Nema 4/12, Nema 7/9, Adjustable friction clutch, Spreader, Hoist on left, Delay on Reverse, Timer to Close, Double Limit, Electronic Control Board